| 4 | | Trac configuration is done by editing the '''`trac.ini`''' config file, located in `<projectenv>/conf/trac.ini`. |
|---|
| 5 | | |
|---|
| 6 | | == Global Configuration == |
|---|
| 7 | | |
|---|
| 8 | | Since version 0.9, Trac can also read the configuration from a global `trac.ini` file. These global options will then be merged with the environment-specific options, where local options override global options. |
|---|
| 9 | | |
|---|
| 10 | | The global configuration is by default localted in `$prefix/share/trac/conf/trac.ini`. It can be moved to a different location (for example, `/etc/trac.ini`), but that requires changing the file `trac/siteconfig.py` which gets created when Trac is installed. |
|---|
| 11 | | |
|---|
| 12 | | == Reference == |
|---|
| 13 | | |
|---|
| 14 | | This is a brief reference of available configuration options. |
|---|
| 15 | | |
|---|
| 16 | | [[TracIni]] |
|---|
| 17 | | |
|---|
| 18 | | == [components] == |
|---|
| 19 | | (''since 0.9'') |
|---|
| 20 | | |
|---|
| 21 | | This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to `enabled` or `on` will enable the component, any other value (typically `disabled` or `off`) will disable the component. |
|---|
| 22 | | |
|---|
| 23 | | The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module. |
|---|
| 24 | | |
|---|
| 25 | | Consider the following configuration snippet: |
|---|
| 26 | | {{{ |
|---|
| 27 | | [components] |
|---|
| 28 | | trac.ticket.report.ReportModule = disabled |
|---|
| 29 | | webadmin.* = enabled |
|---|
| 30 | | }}} |
|---|
| 31 | | |
|---|
| 32 | | The first option tells Trac to disable the [wiki:TracReports report module]. The second option instructs Trac to enable all components in the `webadmin` package. Note that the trailing wildcard is required for module/package matching. |
|---|
| 33 | | |
|---|
| 34 | | See the ''Plugins'' page on ''About Trac'' to get the list of active components (requires `CONFIG_VIEW` [wiki:TracPermissions permissions].) |
|---|
| 35 | | |
|---|
| 36 | | See also: TracPlugins |
|---|
| 37 | | |
|---|
| 38 | | ''Note that prior to Trac r2335 (that applies to 0.9b1 and 0.9b2), you would use a `[disabled_components]` section instead. See a [http://projects.edgewall.com/trac/wiki/TracIni?version=42 previous version] of this page for the details.'' |
|---|
| 39 | | |
|---|
| 40 | | ---- |
|---|
| 41 | | See also: TracGuide, TracAdmin, TracEnvironment |
|---|
| 42 | | |
|---|
| | 5 | Trac configuration is done by editing the '''`trac.ini`''' config file, located in `< |
|---|
